Your Friendly Security and Control Centre

The protection of your home and your family is a priority. PowerMax^TM is quite simply the most advanced, user friendly and reliable security system available today.

PowerMax^TMis designed to give you greater security, convenience and control, with more security features than virtually any other conventional control panel.

It is accessible to nearly everyone, including the elderly and the physically challenged.

PowerMax^TM is easy to use too, with a voice prompt that can talk you through system operations. In addition, PowerMax^TM provides a range of home control capabilities, such as scheduling operation of lights and appliances, recording and playback of audio messages and notifying you when your child or partner comes home and disarms the system.

PowerMax^TM can be quickly installed without the need to drill and run cables through walls, which means fast, clean and cost-effective installation.

The PowerMax^TM Panel is neat and compact and will fit in with any decor.

Accessories and Component parts compatible with the PowerMax^TM

K-940 and MCPIR-3000

The K-940 MCW is a compact, fully supervised wireless pet immune PIR detector. It operates with TSI^TM and is immune to pets up to 18 kg (40 lbs), and has a coverage range of 9 x 9 m (30 x 30 ft ). It has programmable triple pulse count. The K-940 MCW is compatible with all Visonic Ltd PowerCode^TM receivers.

The MCPIR-3000 is an advanced, fully supervised ultra-low current wireless PIR, that incorporates a PowerCode^TM transmitter and is the most compact wireless PIR detector in the industry. It provides a standard 12 x 12 m (40 x 40 ft) pattern, with interchangeable lenses available. Adjustable pulse count, vertical adjustment and a visible light rejection filter virtually eliminate false alarms.

The MCT-101, the MCT-102 and the MCT-104 are 1, 2, and 4-button multipurpose handheld PowerCode^TM transmitters.
The compact transmitter may be fitted with a belt clip, or tucked conveniently inside a pocket or a purse. Improved technology has contributed to superior transmission range, longer battery life and a stylish, ergonomic design.

The MCT-100 is a fully supervised PowerCode^TM, two-input wireless transmitter. Each input has its own individual 24-bit PowerCode^TM ID which identifies it to the target receiver. A low temperature version, MCT-100LT, is also available. It has been specially adapted to operate in temperatures as low as -30°C.

MCT-211 is a miniature waterproof wrist-worn transmitter, for use in advanced alarm and remote control systems. When the push-button is pressed, the transmitter sends out a unique 24-bit ID code and an alarm code, identifiable by compatible receivers. All MCT-211 units are supplied with a wristband. Power is supplied by a 3-volt lithium battery. Low battery voltage is reported.

MCT-423 is photoelectric smoke detector fitted with a PowerCode^TM fully supervised UHF transmitter. It is designed to sense smoke, but not gas, heat or flame. The detector provides early warning of developing fires by sounding an alarm with its built-in alarm horn, and by transmitting a coded alarm signal to a wireless alarm control panel. The fire alarm initiated by the MCT-423 allows people present within the protected area to escape before the fire spreads or to put out the fire.

MCT-302 is a fully supervised PowerCode^TM magnetic contact wireless transmitter, that can be used in virtually all applications where an ordinary magnetic contact is normally used, and where hardwiring would be difficult or impossible.

The MCT-501 is a wireless glassbreak detector with a PowerCode^TM transmitter. The acoustic sensor module of the MCT-501 is omni-directional, providing 360° coverage. The sensor can be mounted as close as 1 m (3.3 ft) from the glass. When mounted on an opposite wall or adjoining walls or on the ceiling, the range is 6 m (20 ft) for plate, tempered, laminated and wired glass. For armor-coated glass, the sensor should be mounted no further than 3.65 m (12 ft) from the glass.

The MCT-201 is designed for use with advanced high-security alarm and remote control systems. It is compatible with all Visonic Ltd PowerCode™ receivers. Visual and transmitted low-battery indications are provided.

PetSmart^TM K-980 is an animal immune PIR detector with TSI^TM designed for residential and commercial applications. It comes in a durable, housing with an integral swivel bracket. It is immune to pets up to 36 kg (80 lbs) and covers a 12 x 12 m (40 x 40 ft) area. A sealed optical chamber protects the sensor from insects and air currents. The adjustable 1, 2 and 3-pulse counter virtually eliminates false alarms.